Thursday, September 6, 2012

Fridge Seals

One way of keeping your appliance in a good condition is to constantly keep a check on the gasket or the fridge seal. Suitable care ensures proper performing and will increase the durability of the refrigerator. So what are those few important tips that you will have to keep in mind? Here are some tips:


Any machine which works regularly must need cleaning;  make sure you clean your fridge and the fridge seal often and if any damage is observed, it should immediately be looked into.
Never use hard detergents or any other form of chemical to clean, this may damage the seal, however chlorine bleach helps you remove some stubborn seals.
Make sure the power is off first! Keep your pets away from the equipment as they might chew away the seal!


There are usually two types of seals: The magnetic and non-magnetic. The magnetic seals hard because of the magnetic strips inside, usually used in advanced equipments with big capacity.

The non-magnetic ones are also called as compression seal; they are soft and flexible and are very common. The magnetic ones are suppose to be more durable and it seals the fridge better whereas the compression seals are easier to replace than the other one. The type of fridge seal depends on the model number and the brand. One has to keep note of it.

People have to know few basic guidelines as to how to replace a fridge seal. Most of them say that fridge seals can be replaced without professional help.

But do not take the risk of handling in on your own if you are unsure. Sydney fridge seal are always here for you. They provide their customers with quality service at affordable rates. They know what is best for your refrigerator!

 Knowing your seal well will help you order a new one without much problem.
The refrigerator gets damaged due to the flaw in temperature and humidity control and this function is done by the fridge seal.
 Our purpose is to save energy, so get rid of the old seal even though your equipment might be old, it doesn't matter!



No comments:

Post a Comment